oil separator1625775400 features not corrosion resistant, durable. The device is equipped with touch screen, easy to operate and maintain, real-time monitoring of the device itself
Simple working principle of oil separator1625775400: compressor out of high pressure gas (gaseous working medium and lubricant), enter the oil separator, into the oil separator of guide, the guide blade spiraling flow, by centrifugal force and gravity, be separated from the working medium gas, lubricating oil along the cylinder wall. Working medium gas through porous baffle by the center of the pipe lead to oil separator. Separate the lubricant, focused on the bottom of the oil separator, can regularly, or use the floating ball valve, make the automatic return to the compressor crankcase oil. Centrifugal swirl flow velocity within the recommended as: 10 to 25 m/s, ammonia gas Lyon 20-20 m/s.
roleIn a vapor compression refrigeration system, after compression ammonia steam Leon steam (or gas), is in a state of high pressure high temperature of overheating. Due to its discharge of fast speed and high temperature. Part of the cylinder wall lubricating oil due to the hard to avoid the effect of high temperature oil steam and oil particles with refrigerant vapor discharge. And exhaust temperature is higher, the faster the flow velocity, the more oil discharge. Filter type oil separator filter type oil separator is used to Leon refrigeration system, often referred to as the chlorine Leon oil separator 1625775400
classificationFilter type oil separator: when the compressor discharge after entering into the high pressure refrigerant gas separator due to large flow section, gas flow rate suddenly reduce and change direction, and air intake when several layers of wire mesh filter effect, is mixed with gas refrigerant in the lubricating oil isolated and dripping gathered at the bottom of the container. When the amount of lubricating oil gathering of fixed height, through automatic oil return valve, back to the compressor crankcase. During normal operation, as a result of the float valve intermittent work, makes the return pipe when cold when hot, when the oil return pipe heat, no oil return pipe is cold. If the return pipe was cold or hot, it shows that floating ball valve is broken, must carry out maintenance and repair, maintenance manual oil return valve can be used for oil return. The oil separator has simple structure, easy fabrication, applied widely, but the effect of oil than packing type.
Hot Tags: oil separator 1625775400, suppliers, factory, wholesale, cheap, low price, for sale, in stock, buy discount
