Many industries require the compressed air of air compressors to be anhydrous, but air compressors often have water phenomenon. What are the reasons for air compressors to have water?
1. Because there is always water in the air, the so-called humidity, after compression, it will become a supersaturated state, and the water in the air will be analyzed and become a liquid. The moisture content in the compressed air is related to the humidity of the air. If the environment in the equipment room is too humid, the moisture content in the air will exceed the usage standard.
2. The automatic drainer of the air compressor itself is blocked or the automatic drainer of the air storage tank is blocked.
3. The corresponding dryer is not installed or does not work normally after installation (drying equipment fails, and it is not detected and processed in time), and the gas compressed by the air compressor is not processed in time, resulting in a large amount of moisture after removal, which cannot be meet the normal use requirements.
4. The post-installation measures are not sufficient. In the production process with strict requirements on the quality of the compressor gas, there are generally facilities such as precision filters to perform a second action on the gas to further purify the gas until it meets the production requirements.
